Advancing American Gardening & Independent Growers(202) 559-7475
The American Garden Association Official Seal
The American Garden AssociationNational Gardening & Horticultural Membership Organization
Stoneyard Tons · Cubic Yards · Compaction Factor

Pea Gravel, Crushed Stone & River Rock Calculator

Convert path, patio base, French drain, or driveway dimensions into exact stoneyard tons, cubic yards, 50-lb bags, geotextile fabric, and perimeter edging.

Aggregate Takeoff336 sq ft @ 4.0 in
Stoneyard Tonnage to Order
6.69 tons
4.77 cubic yards · 13,373 lbs
0.5 ft³ (~50 lb) Bags
258 bags
Geotextile (+10% Lap)
370 ft²
Perimeter Edging
76 lin ft
4-sided outer border
Est. Stone Cost
$361.08
Excludes haul fee

Aggregate Density, Depth & Base Engineering Guide

Aggregate TypeRecommended DepthBulk DensityHardscape & Drainage Use
Pea Gravel (3/8" Rounded Washed)2.0 – 3.0 in1.35 tons / yd³ (2,700 lb)Comfortable underfoot for garden paths, dog runs, and play areas; always confine with rigid steel or stone edging.
#57 Crushed Stone (3/4" Clean Angular)3.0 – 4.0 in1.40 tons / yd³ (2,800 lb)95%+ void drainage; standard aggregate for French drains, retaining wall backfill, and driveway top Wearing courses.
Crusher Run / Quarry Process (#21A / ABC)4.0 – 8.0 in1.50 tons / yd³ (3,000 lb)Angular 3/4" stone blended with stone dust fines; locks solid when plate-compacted in 2–3 in moistened lifts under pavers.
Decomposed Granite (DG — Fines In)2.5 – 4.0 in1.48 tons / yd³ (2,960 lb)Premier ADA-firm courtyard and xeriscape walkway surface; add organic stabilizer when installed on >4% grades.
Washed River Rock / Cobble (1" – 3")3.0 – 5.0 in1.30 tons / yd³ (2,600 lb)Dry creek beds, downspout splash zones, and foundation drip lines; lay at least 2x the stone diameter to hide fabric.

Frequently Asked Questions

How many tons of gravel are in a cubic yard?

One cubic yard of washed pea gravel or river rock weighs roughly 1.30 to 1.35 tons (2,600–2,700 lbs). Clean #57 crushed limestone or granite weighs ~1.40 tons per cubic yard (2,800 lbs), and dense Crusher Run / Quarry Process base with stone dust weighs ~1.50 tons per cubic yard (3,000 lbs).

How deep should gravel be for a walkway, xeriscape bed, or driveway?

Garden walkways and decorative stone beds need 2 to 3 inches over geotextile fabric. Patio paver bases require 4 to 6 inches of compacted Crusher Run, and residential gravel driveways require 6 to 8 inches installed in two layers (#3 base stone + #57/fines top layer).

How many 0.5 cubic foot (50-lb) gravel bags equal 1 ton?

At ~50 lbs per 0.5-cubic-foot hardware store bag, 1 ton (2,000 lbs) equals 40 bags, and 1 cubic yard equals 54 half-cubic-foot bags. For anything over 1 ton, bulk stoneyard delivery is dramatically more economical.

How much extra stone should I add for plate compaction?

Add 5% to 8% for loose decorative river rock or pea gravel, and 15% to 20% for Crusher Run, road base, or decomposed granite compacted in lifts with a vibratory plate compactor.

Field Notes

Hardscape Base & Drainage Standards

  • Quarries and stoneyards sell aggregate by the short ton (2,000 lbs), not cubic yards. Depending on stone size and fines, 1 cubic yard equals 1.30 to 1.50 tons.
  • Compacted paver bases (Crusher Run / Road Base) shrink 15% to 20% under a vibratory plate compactor—never skip the compaction multiplier or your finished grade will sit low.
  • Use non-woven needle-punched geotextile fabric (4 oz–6 oz) beneath driveways, French drains, and stone beds to separate subsoil clay from aggregate while letting water percolate.
  • Never lay rounded pea gravel deeper than 2.5–3 inches on walkways; excessive depth creates a "beach sand" sinking effect.
Free AGA Membership

Join The American Garden Association

Open to home gardeners, collectors, backyard propagators, market growers, nurseries, and landscape pros nationwide. Free to join, with an optional 4-piece printed Member Kit.

Free AGA MembershipOpen to every gardener & grower
Join Free →